 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SUBMINIATURE SOLID STATE LAMP AM2520SURC09 HYPER RED Features OSUBMINIATURE PACKAGE. OWIDE VIEWING ANGLE. OZ-BEND LEAD. Description The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. OLONG LIFE - SOLID STATE RELIABILITY. OLOW PACKAGE PROFILE. ORoHS COMPLIANT. OPACKAGE : 1000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAD1282 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: APR/06/2005 DRAWN: S.H.CHEN PAGE: 1 OF 4 ERP:1202000699 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. AM2520SURC09 HYPER RED (InGaAlP) WATER CLEAR 280 Typ. 1000 Viewing Angle 21/2 20 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Symbol peak D 1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Typ. 640 628 27 45 1.9 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Power dissipation Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Hyper Red 170 30 185 5 -40C To +85C Units mW mA mA V SPEC NO: DSAD1282 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: APR/06/2005 DRAWN: S.H.CHEN PAGE: 2 OF 4 ERP:1202000699 Hyper Red AM2520SURC09 SPEC NO: DSAD1282 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: APR/06/2005 DRAWN: S.H.CHEN PAGE: 3 OF 4 ERP:1202000699 AM2520SURC09 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD1282 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: APR/06/2005 DRAWN: S.H.CHEN PAGE: 4 OF 4 ERP:1202000699 |
Price & Availability of AM2520SURC09
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |